Shopping Cart 0 item(s)    view cart
BFT P4.5 Hydraulic Swing Gate Operator Double Kit Handles Gates 1100LBS 15ft
BFT P4.5 Hydraulic Swing Gate Operator Double Kit Handles Gates 1100LBS 15ft

BFT P4.5 Hydraulic Swing Gate Operator Double Kit Handles Gates 1100LBS 15ft

Your Price:$2,482.77
Part Number:BFT P4.5 Hydraulic Swing

BFT P4.5 Hydraulic Swing Gate Operator Double Kit Handles Gates 1100LBS 15ft

    Kit Includes
  • 2 Actuator
  • 1 Rigal 5 Control Panel
  • 2 Mitto Remote Controls
  • 1 Reflective Safey Eye

The main shaft of the gate operator is filled with hydraulic fluid, and there is a stopper in the center which separates the fluid into 2 chambers within the shaft. The stopper is connected to the part of the operator that moves in and out, opening and closing the gate. The motor is next to a pump with 2 tubes - one reaching into one chamber of fluid and another reaching into the other chamber of fluid. When activated, the pumps take water out of one chamber and pump it into the other chamber, which forces the stopper and likewise the gate operator to move in and out depending on whether the gate is opening or closing. Because of this simple design, hydraulic gate operators are much more reliable than electromechanical gate operators.

Gate opener can operate in extreme temperatures. From 14 degrees Fahrenheit to 140 degrees Fahrenheit (-10 C to + 60 C). Strong, compact hydraulic piston, available in various versions depending on specific needs and field of use. There are models featuring hydraulic locking and non-locking (reversible) models that need a solenoid lock to keep them in position. Operating force is adjusted with extreme precision by means of the control unit’s electronic control. Operation at the end of travel is adjusted electronically in the control panel.

Special features:

  • Opening angles of 120 degrees
  • reversible
  • Easy manual release in case of power failure
  • Opening and closing: 17 seconds (30 seconds on larger model)
  • Adjustable working time from LCD panel control board
  • Rated up to 500 opening and closing cycles per day
  • Six different models to ensure that all application and installation scenarios are met
  • Optional internal positive stops available on some operators: no need for external stops on the driveway
  • Optional thermostatically controlled heater available to ensure smooth operation in colder climates
  • Install a complete pre-wired electrical enclosure box to further improve aesthetics and add many optional entry and safety systems all in one confined lockable enclosure box
  • Hydraulic adjustable torque setting.
  • Torque limiter from the control panel
  • Heated board option for cold weather climate

 

REFERENCEDESCRIPTIONVOLTAGELEAF WEIGHTLEAF LENGTH
P935061 00003P4,5 UL/CSA120 Vup to 1100 lb (~500 kg)up to 15’ (4.5 m)
P935060 00003P7 UL/CSA120 Vup to 1100 lb (~500 kg)up to 23’ (7 m)

 

TECHNICAL FEATURES
P4,5P7
Control panelRIGEL 4 UL/CSA (suggested)RIGEL 4 UL/CSA (suggested)
Reversible/irreversible operatorreversiblereversible
Power supply120 V, 60 Hz single-phase120 V, 60 Hz single-phase
Absorbed power0,33 hp (250 W)0,33 hp (250 W)
Thermal protectionintegratedintegrated
Rod working stroke15.35’’ (390 mm)15.35’’ (390 mm)
Rod speed0,55 ips (14 mm/s)0,33 ips (8,3 mm/s)
Opening time30 s45 s
Closing time28 s + slowdown42 s + slowdown
Slowdownhydraulic on closinghydraulic on closing
Impact reactionhydraulic clutchhydraulic clutch
lockelectric lockelectric lock
Manual releasereversible + release knobreversible + release knob
Operating cycleintensive useintensive use
Environmental conditionsda 14°F (-10°C) a 140°F (+60°C)da 14°F (-10°C) a 140°F (+60°C)
Degree of protectionIP55IP55
Operator weight122,5 N (~12,25 kg)122,5 N (~12,25 kg)
Dimensionssee drawing next pagesee drawing next page

Related Items